| PROGRAMME | |||||||||||||||
| MAIN TOPICS | |||||||||||||||
| 01 Testing and Diagnostic | 10 Optical Techniques | ||||||||||||||
| 02 Thermo-Fluid Systems | 11 Impact and Crashworthiness | ||||||||||||||
| 03 Civil Engineering Applications | 12 Analytical and Numerical Models | ||||||||||||||
| 04 Sensors and Instrumentation | 13 Composite and Advanced Materials | ||||||||||||||
| 05 Teaching Experimental Mechanics | 14 Fatigue and Fracture | ||||||||||||||
| 06 Modes of Failure | 15 Machine design and prototyping | ||||||||||||||
| 07 Nanotechnologies and Nanomaterials | 16 Industrial Engineering | ||||||||||||||
| 08 Biomechanical Applications | 17 Joints and Fasteners | ||||||||||||||
| 09 Tribology, Surface and Interface Engineering | 18 Case studies and practical applications | ||||||||||||||
| THEMATIC SYMPOSIA | |||||||||||||||
| Additive Manufactured Materials: Production, Experiments and Applications | |||||||||||||||
| Advances in Experimental Techniques under Impact and Shock | |||||||||||||||
| Dynamic Behavior of Materials | |||||||||||||||
| Experimental Big Data Analysis and Artificial Intelligence | |||||||||||||||
| Experimental Mechanics for Nondestructive Testing | |||||||||||||||
| Experimental techniques and monitoring systems for major structures | |||||||||||||||
| Experimental Techniques for Materials Characterization with special focus on Instrumented Indentation Test: to microstructure, degradation and residual stresses | |||||||||||||||
| Experimental testing of lightweight materials, structures and components | |||||||||||||||
| Non-Destructive Monitoring of Structural Integrity | |||||||||||||||
| Novel Applications of Experimental Mechanics | |||||||||||||||
| Optical Technics in Experimental Mechanics | |||||||||||||||
| Thermal based techniques for materials and components analysis: applications and perspectives | |||||||||||||||
| Thermoelastic Stress Analysis | |||||||||||||||
| Wood Mechanics and Timber Engineering | |||||||||||||||
| X-ray & Neutron Tomography and Applications | |||||||||||||||
| PARTNERS | |||||||||||||||
| EURASEM | DIN - University of Bologna | AIAS | |||||||||||||
|
|
||||||||||||||
|
|||||||||||||||
| SPONSORS | |||||||||||||||
| X-sight | ITALSIGMA | ||||||||||||||
|
|
||||||||||||||
| ORGANIZING COMMITTEE | |||||||||||||||
| Prof. Dario Croccolo (Chairman) | |||||||||||||||
| Prof. Giorgio Olmi (Vice-Chairman) | |||||||||||||||
| Prof. Massimiliano De Agostinis (Vice-Chairman) | |||||||||||||||
| Eng. Stefano Fini (Vice-Chairman) | |||||||||||||||
| Eng. Tommaso Maria Brugo (Vice-Chairman) | |||||||||||||||
| Eng. Mattia Mele (Vice-Chairman) | |||||||||||||||
| Eng. Chiara Scapecchi (Vice-Chairman) | |||||||||||||||
| Dr. Nicoletta Madrigali and INTRAS Congressi | |||||||||||||||
| INTERNATIONAL SCIENTIFIC COMMITTEE | |||||||||||||||
| Nikolaos Alexopoulos (Greece) | Dimitrios Karalekas (Greece) | Pawel Platek (Poland) | |||||||||||||
| Alireza Amirkhizi (USA) | Miloslav Kepka (Czech Rep.) | Vikas Prakash (USA) | |||||||||||||
| Bonnie Antoun (USA) | Mateusz Kopec (Poland) | Gonzalo Ruiz López (Spain) | |||||||||||||
| Leslie Banks-Sills (Israel) | Zbigniew Kowalewski (Poland) | Alexis Rusinek (France) | |||||||||||||
| Giovanni Belingardi (Italy) | Giuseppe Lacidogna (Italy) | Yoshida Sanichiro (USA) | |||||||||||||
| Nicola Bonora (Italy) | Luciano Lamberti (Italy) | Raffaella Sesana (Italy) | |||||||||||||
| Tore Borvik (Norway) | Genevieve Langdon (South Africa) | Luis Felipe Sesé (Spain) | |||||||||||||
| Sven Bossuyt (Finland) | Franck Lauro (France) | Joaquim Silva Gomes (Portugal) | |||||||||||||
| John Botsis (Switzerland) | Alexandre Lavrov (Norway) | Blazej Skoczen (Poland) | |||||||||||||
| Elsa Caetano (Portugal) | David Lecompte (Belgium) | Maria Strantza (USA) | |||||||||||||
| Katia Casavola (Italy) | Xide Li (China) | Erman Tekkaya (Germany) | |||||||||||||
| Luciano Lamberti (Italy) | Sara Mantovani (Italy) | Luca Tomesani (Italy) | |||||||||||||
| Lorella Ceschini (Italy) | Shaker A. Meguid (Canada) | Rachel Tomlinson (UK) | |||||||||||||
| Jan Chvojan (Czech Rep.) | Mattia Mele (Italy) | Danny Van Hemelrijck (Belgium) | |||||||||||||
| Terry Yuan-Fang Chen (Taiwan) | Robert Mines (UK) | Wim Van Paepegem (Belgium) | |||||||||||||
| Sam Coppieters (Belgium) | Roberto Montanari (Italy) | Mario Vaz (Portugal) | |||||||||||||
| Dario Croccolo (Italy) | Yoshiharu Morimoto (Japan) | Patricia Verleysen (Belgium) | |||||||||||||
| Francesca Maria Curà (Italy) | Sayed A. Nassar (USA) | George Z. Voyiadjis (USA) | |||||||||||||
| Raj Das (Australia) | Christopher Niezrecki (USA) | Liliang Wang (UK) | |||||||||||||
| Massimiliano De Agostinis (Italy) | Giorgio Olmi (Italy) | Wei-Chung Wang (Taiwan) | |||||||||||||
| Patrick De Baets (Belgium) | Yukitoshi Otani (Japan) | Paul Wood (UK) | |||||||||||||
| Stefano Fini (Italy) | Carmine Pappalettere (Italy) | Sanichiro Yoshida (USA) | |||||||||||||
| Motoharu Fujigaki (Japan) | Jean-Noël Périé (France) | Qican Zhang (China) | |||||||||||||
| Matteo Giacopini (Italy) | Bernhard Pichler (Austria) | Xiaoxin Zhang (Spain) | |||||||||||||
| Francois Hild (France) | Elzbieta Pieczyska (Poland) | Andrea Zucchelli (Italy) | |||||||||||||
| Johan Hoefnagels (Netherlands) | Anastasios Vassilopoulos (Switzerland) | ||||||||||||||
| CONFERENCE AGENDA | |||||||||||||||
| MONDAY, 7th JULY 2025 | |||||||||||||||
| 8:00-9:00 | REGISTRATION | Congress Hall | |||||||||||||
| 9:00-9:15 | OPENING CERIMONY | Bolognini Library | |||||||||||||
| 9:15-10:00 | KEYNOTE LECTURE 1 | Bolognini Library | |||||||||||||
| PROF. SAYED A. NASSAR | |||||||||||||||
| Fastening and Joining Research Institute (FAJRI), USA | |||||||||||||||
| Systems Approach to Simulation, Testing, and Validation of Structural Joints | |||||||||||||||
| 10:00-10:30 | COFFEE BREAK | Congress cloister | |||||||||||||
| 10:30-12:30 | PAPER SESSIONS 1 | All Rooms | |||||||||||||
| Bolognini Library | Room 7 | Room 6 | Room 5 | ||||||||||||
| Additive Manufactured Materials: Production, Experiments and Applications #1 | Wood Mechanics and Timber Engineering #1 | Experimental testing of lightweight materials, structures and components #1 | Novel Applications of Experimental Mechanics #1 | ||||||||||||
| Chair: Giorgio Olmi | Chair: Luis Zelaya-Lainez | Chair: Sergio Baragetti | Chair: Wei-Chung Wang | ||||||||||||
| Ref:56 A STUDY OF LOOSENING PHENOMENON AND ACCELERATION RATIO OF LOOSENING IN ACTUAL EQUIPMENT COMPARED TO RESULTS OF LABORATORY-STYLE BOLTED JOINTS LOOSENING TESTS S.Hareyama , K.Manabe , S.Kobayashi |
Ref:256 THE EFFECT OF CATENARY ACTION IN RESTRAINED AND REINFORCED GLUED LAMINDATED TIMBER MEMBERS L.Esser , A.Frangi |
Ref:4 MECHANICAL BEHAVIORS OF CARBON/EPOXY-ALUMINUM LAMINTES Z.Jiang , J.TSAI |
Ref:10 FLAME RETARDANCY AND MSCHNICAL PROPERTIES OF NOVEL HALOGEN-FREE POLYURETHANE CONTAINING CHITOSAN FROM FISHERIES WASTE M.Shen , C.Chiang , C.Ke |
||||||||||||
| Ref:75 STUDY ON STIFFNESS CHANGE OF CHAINMAIL STRUCTURE FOR LEG MECHANISMS S.Yamaguchi , T.Tateno |
Ref:50 NUMERICAL SIMULATION OF CONTRIBUTION OF CONCRETE ANCHORAGE TO DUCTILITY OF SHEAR WALLS MADE OF CROSS LAMINATED TIMBER G.Faraone , P.Sejkot , A.Iqbal |
Ref:8 AMBIENT-TEMPERATURE PLASTICITY OF HARD AND BRITTLE MATERIALS AT MICRON-METER-SIZE SCALES H.INUI , K.KISHIDA , Z.CHEN , L.LI , B.PAUL , S.HAN , Z.WANG |
Ref:26 EXPERIMENTALLY VALIDATED FRACTURE OF METASTABLE MATERIALS AT EXTREMELY LOW TEMPERATURES B.Skoczen |
||||||||||||
| Ref:105 EXPERIMENTAL VALIDATION OF A FEM CONSTITUTIVE MODEL FOR AN INNOVATIVE L-PBF AM METAL-MATRIX-COMPOSITE m.crachi |
Ref:51 AXIAL-SHEAR INTERACTION OF ANGLE BRACKETS IN CONNECTIONS OF CROSS-LAMINATED TIMBER P.Sejkot , A.Aloisio , A.Iqbal |
Ref:22 THE PEAK STRESS METHOD FOR THE FATIGUE STRENGTH ASSESSMENT OF ARC-WELDED JOINTS MADE OF ADDITIVELY MANUFACTURED STAINLESS STEEL PARTS L.Contiero , L.Vecchiato , A.Campagnolo , V.Babini , G.Meneghetti |
Ref:32 ELECTROMECHANICAL CHARACTERIZATION OF ORTHOTROPIC MECHANICAL PROPERTIES IN PIEZOELECTRIC PVDF FILMS USING 3D DIGITAL IMAGE CORRELATION R.Elhajjar , O.Schneider , D.Schlitz |
||||||||||||
| Ref:116 MECHANICAL RESPONSE OF 3D PRINTED LATTICE STRUCTURES MADE FROM PAHT-CF MATERIAL UNDER COMPRESSION LOADING P.Platek , M.Sarzynski , K.Cieplak , B.Dekert , P.Baranowsk , M.Kucewicz |
Ref:59 A NANOINDENTATION STUDY ON DIVERSE TECHNICAL LIGNINS FOR BIO-COMPOSITE APPLICATIONS L.Zelaya-Lainez , M.Schwaighofer , M.Königsberger , M.Lukacevic , S.Serna-Loaiza , F.Zikeli , M.Harasek , A.Friedl , O.Lahayne , J.Füssl |
Ref:62 DESIGN OF TEST SETUP TO MEASURE HOOP ELASTIC MODULUS OF GRE PIPES A.Al Shabibi , L.Al Maskari , A.Al Fadhli , A.Al Omairi , A.Al Shukaili |
Ref:12 RESIDUAL STRESS CROWDING EFFECTS ON WIDE BANDGAP ELECTRONICS RELIABILITY N.Al-Mamun , M.Rahman , C.Chavda , M.Munshi , A.Haque , D.Wolfe , F.Ren , S.Pearton |
||||||||||||
| Ref:169 ELASTIC PROPERTIES OF REINFORCED BODY CENTERED CUBIC LATTICE STRUCTURES M.Giacalone , S.Mantovani |
Ref:90 RESTARTING OF LONG-TERM MONITORING OF TWO EIGHT-STORY RESIDENTIAL CLT BUILD M.Dorn , C.Amaddeo , E.Serrano |
Ref:64 A STUDY ON FATIGUE ENHANCEMENT IN NOTHED AEROSPACE COMPONENTS USING LASER SHOCK PEENING M.Attolico , G.Renna , V.Moramarco , C.Casavola |
Ref:198 MICROMECHANICAL CHARACTERISATION OF TWINNING AND DETWINNING DURING FATIGUE IN ZIRCONIUM USING HIGH-RESOLUTION ELECTRON BACKSCATTER DIFFRACTION AND DIGITAL IMAGE CORRELATION TECHNIQUES W.Wan , C.Paramatmuni , X.Yan |
||||||||||||
| Ref:71 EXPERIMENTAL FATIGUE TESTING OF AN ALUMINUM FRAME FOR ELECTRICALLY-POWER ASSISTED CYCLES E.Arcieri , S.Baragetti |
Ref:131 EFFECT OF GEOGRID REINFORCEMNT IN THE GRANULAR CUSHION LAYER ON THE BEHAVIOUR OF DISCONNECTED PILED RAFT SYSTEM S.RAUT , P.Halder , B.Manna , J.Shahu |
||||||||||||||
| 12:30-14:30 | LUNCH | Congress cloister | |||||||||||||
| 14:30-17:30 | PAPER SESSIONS 2 | All Rooms | |||||||||||||
| Bolognini Library | Room 7 | Room 6 | Room 5 | ||||||||||||
| Additive Manufactured Materials: Production, Experiments and Applications #2 | Wood Mechanics and Timber Engineering #2 | Experimental testing of lightweight materials, structures and components #2 | Novel Applications of Experimental Mechanics #2 | ||||||||||||
| Chair: Pawel Platek | Chair: Eva Binder | Chair: Emanuele Vincenzo Arcieri | Chair: Yoshiaki Miyazato | ||||||||||||
| Ref:182 DEPENDENCE OF PHASE ANGLE BETWEEN MECHANICAL LOADING AND TEMPERATURE CYCLES IN TMF ON SMALL CRACK PROPAGATION M.Arai , Y.Omiya , Y.Yamazaki |
Ref:135 IN SITU MONITORING OF A COMPLEX MODEL STRUCTURE BUILT WITH GREEN WOOD AND SUBMITTED TO REAL CLIMATE CONDITIONS S.Bouhlel , A.Cointe , E.Maurin , A.Histace , Y.Mélinge |
Ref:80 NUMERICAL INVESTIGATION OF THE EFFECT OF YIELD STRENGTH ON THE BEHAVIOUR OF CLAMPED CIRCULAR PLATE UNDER TRANSIENT PRESSURE LOADING V.ANUPOJU , S.KHADERI , V.NARAYANAMURTHY |
Ref:38 THERMAL STRESS MEASUREMENT OF THROUGH-GLASS VIA SUBSTRATE BY ENHANCED EXPOSURE THEORY OF PHOTOELASTICITY W.Wang , P. Chen , P.Sung , C. Yang |
||||||||||||
| Ref:200 CHARACTERIZATION OF AGGREGATE DISTRIBUTION IN 3D CONCRETE PRINTING USING X-RAY CT R.Yoshihara , K.Hashimoto , D.Lou , Y.Honda |
Ref:263 FINITE ELEMENT MODELLING OF CLT-STEEL COMPOSITE SHEAR WALLS FOR MASS TIMBER BALLOON-TYPE CONSTRUCTION C.Leong , C.Loss |
Ref:115 EFFECT OF POLYHEDRAL OLIGOMERIC SILSESQUIOXANE (POSS) ON THE COMPRESSIVE BEHAVIOUR OF AN EPOXY POLYMER E.Georgiou , G.Quino , I.Hamerton , R.Trask |
Ref:58 IMAGE STITCHING TECHNOLOGY BASED ON DIGITAL IMAGE CORRELATION (DIC) FOR MEASURING THE STRAIGHTNESS OF LONG COMPONENTS C.SUNG , Z.TSENG , C.Chuang , T. Chen , M.Lin |
||||||||||||
| Ref:201 FABRICATION AND EXPERIMENTAL CHARACTERIZATION OF STRAIN SENSORS BASED ON INKJET PRINTING G.De Pasquale , F.Ursi , S.Fink , A.El-Sarout |
Ref:141 MOISTURE PROTECTION TECHNIQUES FOR THE NARROW FACE OF CLT DURING THE CONSTRUCTION PHASE M.Schweigle , M.Eveborn , M.Dorn , Z.Shehadeh , T.Bader |
Ref:175 FULL-FIELD CHARACTERISATION OF PULTRUDED RODS UNDER COMPRESSION USING THE CRADLE TEST G.Quino , C.Zhao , P.Robinson , T.Richard S. |
Ref:60 DETERMINATION OF MULTIPLE WAVELENGTH PHOTOELASTIC CONSTANTS OF BIREFRINGENT MATERIALS BY USING A HYPERSPECTRAL CAMERA AND IMAGE ANALYSIS T.CHEN , T.Chang , M.Lin |
||||||||||||
| Ref:204 DYNAMIC STRAIN SENSORS INTEGRATED IN THE FUSED FILAMENT FABRICATION OF STRUCTURES F.Ursi , G.De Pasquale |
Ref:142 EFFECT OF WOOD DRYING ON AXIALLY LOADED SCREWS IN OAK M.Pilon , L.Bléron |
Ref:193 FATIGUE BEHAVIOUR OF HOT-ROLLED, LOW CARBON STEEL UNDER PRE-STRAIN AND NOTCH EFFECT I.Tomasi , L.Solazzi , C.Petrogalli , A.Mazzoni , G.Donzella |
Ref:79 QUANTITATIVE FLOW VISUALIZATION OF TRANSONIC DIFFUSER FLOWS H.Kodama , T.Yamashita , S.Nakao , Y.Miyazato |
||||||||||||
| Ref:207 EVALUATION OF INTRA-FILAMENT VOID STRUCTURE OF 3D PRINTED MORTAR WITH DIFFERENT PRINTING SPEED K.Nakase , K.Hashimoto , K.Ota , Y.Hama , T.Sugiyama |
Ref:160 COMBINED EMBEDMENT AND AXIAL LOAD TESTS OF A STEEL DOWEL IN VARIOUS WOOD SPECIES R.Lemaître , T.Bader , M.Schweigler |
Ref:210 PATCH SIZE AND OVERLAPPING OPTIMISATION FOR A NEW GENERATION OF RECYCLED COMPOSITE LAMINATES P.Bettini , F.Mongioì , L.Calervo , A.Milite , A.Zucchelli , T.Brugo , R.PALAZZETTI |
Ref:88 EVALUATION OF ULTRASHORT CREEP TESTS ON HYDRATING CEMENTITIOUS MATERIALS REQUIRES AN EVALUATION PROTOCOL ACCOUNTING FOR CREEP DURING LOAD APPLICATION S.Schmid , L.Zelaya-Lainez , O.Lahayne , M.Peyerl , B.Pichler |
||||||||||||
| Ref:238 STRESS-DRIVEN DESIGN OF GYROID LATTICES WITH VARIABLE THICKNESS: A PRELIMINARY PROCEDURE APPLIED TO CONNECTING RODS E.Mancini , A.Ciccarella , V.Colaiuda , V.Pocetta , G.Dell'Avvocato , L.Di Angelo |
Ref:172 MECHANICS-BASED 3D MODELLING OF CNC-MADE CARPENTRY JOINTS USED IN CLT-GLULAM COMPOSITE FLOORING SYSTEMS Y.Diao , C.Loss |
Ref:221 INVESTIGATION OF THE CREEP DEFORMATION MECHANISM AT ROOM TEMPERATURE ON AZ31 MAGNESIUM ALLOY S.Arikawa |
Ref:233 EFFECT OF INITITAL CONDITIONS ON PASSIVE SCALAIRE MIXING IN TURBULENT WAKES A.Benaissa |
||||||||||||
| Ref:170 STRESS CONCENTRATION IN HYBRID TPMS GEOMETRIES UNDERGOING AXIAL FATIGUE LOADS D.Croccolo , M.De Agostinis , S.Fini , M.Mele , G.Milan , G.Olmi , A.Paffetti |
Ref:173 COMPARISON OF MECHANICAL PROPERTIES OF CROSS LAMINATED TIMBER PRESSED ON VACUUM AND HYDRAULIC PRESSES W.Plowas , R.Hairstans , B.Shirley , S.Hart |
Ref:294 EXPERIMENTAL ASSESSMENT AND MODELING OF MECHANICAL PROPERTIES FOR PATCH-BASED RECYCLED COMPOSITES IN FOUR-POINT BENDING AND L-TENSILE TESTS L.Calervo , R.Palazzetti , P.Bettini |
Ref:123 USE OF SHAPE MEMORY ALLOY FOR THERMAL STRAIN-ABSORPTION IN AEROSPACE APPLICATIONS A.Berrocal-Coba , M.Menegozzo , F.Just-Agosto , A.Cecchini-Brigi |
||||||||||||
| Ref:183 ELASTIC PROPERTY ANALYSIS IN TRIPLY PERIODIC MINIMAL SURFACE STRUCTURES THROUGH HOMOGENIZATION AND ARTIFICIAL NEURAL NETWORKS G.Milan , D.Croccolo , M.De Agostinis , S.Fini , M.Mele , G.Olmi , A.Paffetti |
Ref:245 INVESTIGATING THE INFLUENCE OF DELIGNIFICATION AND POLYMER INFILTRATION ON WOOD CELL WALL PROPERTIES VIA NANOINDENTATION J.Schindler , M.Königsberger , L.Zelaya , A.Mariani , D.Nuvoli , J.Füssl |
Ref:311 SPH-FEM APPROACH FOR FLUID-STRUCTURE INTERACTION OF ANISOGRID LATTICE STRUCTURES E.Arcieri , S.Baragetti |
Ref:15 HIGH-PERFORMANCE TRANSPARENT CONDUCTING ELECTRODES ON PET BY BLADE COATING AND PHOTONIC CURING AT > 10 M/MIN J.Bonner , R.Piper , B.Bhandari , J.Hsu |
||||||||||||
| Ref:184 DESIGN OF LIGHTWEIGHT CELLULAR STRUCTURES OPTIMISED FOR PIN-COLLAR JOINTS A.Paffetti , D.Croccolo , M.De Agostinis , S.Fini , M.Mele , G.Milan , G.Olmi |
Ref:328 FATIGUE BEHAVIOR OF LACK OF PENETRATION DEFECTS IN WELDED ALUMINUM JOINTS l.santoro , e.viglietti , r.sesana |
Ref:16 BENCHMARK OF ANALYTIC VS. MONTE CARLO BATCH AQCUISITION FUNCTIONS FOR MACHINE LEARNING OPTIMIZATION OF EXPERIMENTS M.Lee , I.Mia , W.Vandenberghe , J.Hsu |
|||||||||||||
| 17:00-18:30 | EURASEM COUNCIL MEETING | ||||||||||||||
| (EURASEM Council Members ONLY) | |||||||||||||||
| 18:30-21:00 | WELCOME DINNER | Congress cloister | |||||||||||||
| TUESDAY, 8th JULY 2025 | |||||||||||||||
| 8:00-9:00 | REGISTRATION | Congress Hall | |||||||||||||
| 9:00-9:45 | KEYNOTE LECTURE 2 | Bolognini Library | |||||||||||||
| PROF. SHAKER A. MEGUID | |||||||||||||||
| University of Toronto, Canada | |||||||||||||||
| Structural Integrity of Aviation Gas Turbine Engines: Challenges and Opportunities | |||||||||||||||
| 9:45-10:30 | COFFEE BREAK | Congress cloister | |||||||||||||
| 10:30-12:30 | PAPER SESSIONS 3 | All Rooms | |||||||||||||
| Bolognini Library | Room 7 | Room 6 | Room 5 | ||||||||||||
| Additive Manufactured Materials: Production, Experiments and Applications #3 | Experimental Mechanics for Nondestructive Testing #1 | Dynamic Behavior of Materials #1 | Experimental Techniques for Materials Characterization with special focus on Instrumented Indentation Test: to microstructure, degradation and residual stresses #1 | ||||||||||||
| Chair: Dario Croccolo | Chair: Piervincenzo Rizzo | Chair: Sara Ricci | Chair: Maria Richetta | ||||||||||||
| Ref:288 EFFECT OF PLASTIC PRE-STRAIN ON THE YIELD SURFACE OF LPBF-MANUFACTURED STAINLESS STEEL 316L V.Dubey , M.Kopec , M.Pawlik , P.Wood , Z.Kowalewski |
Ref:52 NONDESTRUCTIVE TESTING FOR THE ESTIMATION OF THE RAIL NEUTRAL TEMPERATURE M.Belding , S.Baktash , P.Rizzo |
Ref:44 EFFECTS OF ULTRASONIC VIBRATION ON THE KINETIC STATE OF ATOMS AROUND THE SCREW DISLOCATION OF BCC FE A.Asazuma , S.Arikawa |
Ref:28 ENGINEERING APPLICATIONS OF FIMEC TEST R.Montanari , A.Varone |
||||||||||||
| Ref:298 PARAMETRIC STUDY OF ENERGY ABSORPTION CAPABILITIES OF A NOVEL LATTICE STRUCTURE J.Melendez , S.Candelaria , D.Serrano , M.Menegozzo , P.Gonzales |
Ref:102 EXPERIMENTAL INVESTIGATION ON THE MOTORCYCLE SWINGARM DEFORMABILITY AND STABILITY B.Almeida , A.Leite , S.Dias , M.Oliveira , I.Arce , F.Pereira |
Ref:83 EXPERIMENTAL CHARACTERIZATION FOR THE RATCHETTING EFFECT OF ISOTROPIC SOFT MAGNETORHEOLOGICAL ELASTOMER Y.Li , H.Deng , X.Gong |
Ref:186 MULTISCALE INSTRUMENTED INDENTATION TESTS TO DETERMINE THE MECHANICAL PERFOMANCE OF A L-PBF 316L DEPOSIT G.Maizza , A.Hamed , A.Albanese , M.Marques |
||||||||||||
| Ref:306 STUDIES ON MECHANICAL PROPERTIES OF MARAGING M300 STEEL MANUFACTURED ADDITIVELY VIA SLM P.Platek , G.Olmi , J.Kluczynski , M.Sarzynski , J.Janiszewski , K.Cieplak , J.Sienkiewicz , D.Croccolo |
Ref:103 TEMPERATURE-DEPENDENT EXPERIMENTAL CHARACTERIZATION OF A STRETCHABLE STRAIN SENSOR B.Almeida , J.Fernandes , M.Oliveira , R.Morais , F.Pereira |
Ref:85 MAGNETIC FLEXIBLE SENSOR WITH RANDOMLY DISTRIBUTED PINE-BRANCH MICROSTRUCTURE FOR BIDIRECTIONAL RECOGNITION D.Li , X.Gong , H.Deng , S.Xuan |
Ref:202 CORRELATION BETWEEN EBSD PARAMETERS AND PL-NIIT BASED MECHANICAL PERFORMANCES OF A PBF-LB 316L DEPOSIT F.Hafeez , G.Maizza , R.Montanari , A.Varone |
||||||||||||
| Ref:312 INFLUENCE OF PROCESSING PARAMETERS ON MECHANICAL PROPERTIES OF MULTI-MATERIAL COMPONENTS FROM ALUMINIUM AND COPPER – MANUFACTURED BY LASER-BASED POWDER BED FUSION N.Alexopoulos |
Ref:246 EFFICIENCY OF PZT TRANSDUCERS IN DAMAGE DETECTION OF STRUCTURES M.Dziendzikowski , K.Kowalczyk , Z.Dworakowski |
Ref:86 BIONIC-LEAF VEIN INSPIRED BREATHABLE ANTI-IMPACT WEARABLE ELECTRONICS WITH HEALTH MONITORING, ELECTROMAGNETIC INTERFERENCE SHIELDING AND THERMAL MANAGEMENT X.Wang , H.Deng , X.Gong , S.Xuan |
Ref:181 HIGH RESOLUTION DIGITAL IMAGE CORRELATION MEASUREMENTS OF 316H AUSTENITIC STAINLESS STEEL C.Allen , H.Coules , C.Truman |
||||||||||||
| Ref:314 INFLUENCE OF HIGH STRAIN RATE AND TEMPERATURE ON THE YIELD BEHAVIOUR OF 3D PRINTED POLYAMIDE 11 P.Wood , U.Gunputh , M.Pawlik , Y.Pawel , P.Marcin , S.Jacek , J.Alexis , R. |
Ref:302 DETECTION OF LITHIUM-ION BATTERY STATE OF CHARGE USING MAGNETIC FLUXGATE SENSOR Q.Wang , Y.Lyu , J.Gao |
Ref:91 DUAL-MODULUS 3D PRINTING MAGNETORHEOLOGICAL METAMATERIALS FOR NEGATIVE VIBRATION REGULATION C.Lou , X.Lian , H.Deng , X.Gong |
Ref:319 EXPERIMENTAL AND NUMERICAL ANALYSIS OF DAMAGE INDUCED DURING DRY DRILLING OF MULTI-LAYER MATERIALS (CFRP/AL-7075) M.Ameur , R.Zitoune , M.Kenane , M.Habak |
||||||||||||
| Ref:286 ACCELERATING FATIGUE CHARACTERIZATION THROUGH A COMPACT INTEGRATED TESTING MACHINE AND THERMOGRAPHIC METHODS D.D'Andrea , D.Giacomo , R.Dario , S. |
Ref:132 A STUDY ON A NONDESTRUCTIVE METHOD OF DETECTING CERAMIC COATING DEBONGDING USING NDTPEA L.Xu , Z.Hou , S.Pan , C.Qu |
Ref:107 INFLUENCE OF TEMPERATURE ON MICROSTRUCTURAL EVOLUTION DURING THE DYNAMIC TENSILE EXTRUSION OF PURE COPPER S.Ricci , G.Iannitti , G.Testa , A.Ceccacci , A.Pagano , A.Ruggiero , N.Bonora |
|||||||||||||
| 12:30-14:00 | LUNCH | Congress cloister | |||||||||||||
| 14:00-16:00 | PAPER SESSIONS 4 | All Rooms | |||||||||||||
| Bolognini Library | Room 7 | Room 6 | Room 5 | ||||||||||||
| Additive Manufactured Materials: Production, Experiments and Applications #4 | Experimental Mechanics for Nondestructive Testing #2 | Dynamic Behavior of Materials #2 | Experimental Techniques for Materials Characterization with special focus on Instrumented Indentation Test: to microstructure, degradation and residual stresses #2 | ||||||||||||
| Chair: Yasuhiro Yamazaki | Chair: Francesco Lanza di Scalea | Chair: Robert Wragge-Morley | Chair: Giovanni Maizza | ||||||||||||
| Ref:309 INITIAL CHARACTERIZATION OF MULTIPLE SHAPE-MEMORY ANYCUBIC RESIN M.Staszczak , A.Lantada , A.Gradys , L.Urbański , K.Takeda , E.Pieczyska |
Ref:300 IMPROVING THE CAPABILITIES OF ULTRASONIC INSPECTION OF RAILROAD RAILS IN HIGH-SPEED AND WALKING-SPEED TESTING A.Hosseinzadeh , C.Huang , I.Batista , F.Lanza di Scalea |
Ref:113 VALIDATION OF CHAIN DRIVE RESONANCE MODELS BY VIDEO, AUDIO AND TORQUE MEASUREMENTS R.Wragge-Morley , G.Barnaby , J.Bentley , F.Davidson , J.Drabble , K.Kythreotis , S.Lu , M.Wharton , T.Hill , B.Hicks |
Ref:24 ELASTIC MODULUS OF POROUS MATERIALS: MODELS AND EXPERIMENTS M.Richetta , A.Palombi , A.Varone |
||||||||||||
| Ref:162 ROOM AND HIGH TEMPERATURE BEHAVIOUR OF THE ALSI9CU3 ALLOY PRODUCED BY PBF-LB AND SUBJECTED TO TAILORED HEAT TREATMENTS L.Tonelli , L.Castagnini , A.Martucci , I.Lagalante , M.Lombardi , A.Morri , L.Ceschini |
Ref:35 NUMERICAL CALIBRATION OF TENSILE AND COMPRESSIVE FAILURE OF BIO-EPOXY FOAM CORE FOR EXPLICIT ANALYSIS USING A SIMPLIFIED TESTING APPROACH A.Harrison |
Ref:134 ACCURATE STRAIN MEASUREMENT IN SPLIT HOPKINSON BAR TESTING OF FIBROUS COMPOSITES A.Gilat , J.Seidt |
Ref:168 DYNAMIC MODULUS HIGHLIGHTS MICROSTRUCTURAL CHANGES IN 3D-PRINTED METALS D.Croccolo , R.Montanari , G.Olmi , A.Palombi , M.Richetta , A.Varone |
||||||||||||
| Ref:285 USE OF THERMAL AND MECHANICAL INDICATORS FOR THE FATIGUE DAMAGE OF ALSI10MG ADDITIVE MANUFACTURED SPECIMENS R.Nobile , R.De Finis , P.Leo , G.Renna , A.De Luca |
Ref:36 DEVELOPMENT OF AN AUTOMATED PROCESS FOR MATERIAL CARD CALIBRATION OF JOINTS FOR FINITE ELEMENT SIMULATIONS T.Wirtz |
Ref:341 DYNAMIC BEHAVIOR AND IMPACT IGNITION CRITERION OF TI-B-PTFE REACTIVE MATERIAL Z.Peng , R.Liu |
Ref:247 CHARACTERIZATION OF SELECTIVE LASER MELTED TI-6AL-4V SAMPLES IN THE AS BUILT AND STRESS RELIEF STATE P.Leo , G.Renna , A.De Luca , C.Scaramuzzi , N.Soni , F.Panella , T.Primo , G.Papadia |
||||||||||||
| Ref:335 CYCLIC COMPRESSION PROPERTIES OF HIGH-STRENGTH, RECOVERABLE, LIGHT-CURABLE 4D PRINTING LATTICE REINFORCED WITH GLASS FIBERS J.Pan , J.Cai |
Ref:67 BUCKLING STRUCTURES IN A CONTROLLED-THICKNESS GRADIENT: FINITE ELEMENT METHOD AND EXPERIMENTAL STUDIES M.Chargaoui , G.Parry , C.Coupeau |
Ref:295 MULTIVARIABLE REGRESSION MODELS BASED ON NUMERICAL EXTENDED ANALYSES FOR DESIGN PURPOSES D.Croccolo , M.De Agostinis , S.Fini , F.Livera , M.Mele , G.Olmi , G.Piraccini , N.Vincenzi |
Ref:114 ELECTROSPARK DEPOSITION AND ULTRASONIC PEENING TREATMENT ON AL-SI10-MG SELECTIVE LASER MELTED PARTS: MICROSTRUCTURE AND PROPERTIES P.Leo , G.Renna , A.De Luca , R.Nobile , C.Casavola , V.Moramarco , S.Carone , M.Attolico |
||||||||||||
| Ref:216 MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF MONO-MATERIAL AND BI-MATERIAL COMPONENTS FABRICATED BY LASER POWDER BED FUSION A.Angelasto , M.Attolico , S.Campanelli , S.Carone , C.Casavola , V.Errico , P.Leo , V.Moramarco , M.Patronelli , G.Renna , C.Scaramuzzi |
Ref:53 AN EXPERIMENTAL IN VITRO KNEE MODEL TO MEASURE FORCES OF THE ACL AND PCL A.Matos , A.Ramos , J.Simões |
Ref:76 IMPACT THREE-POINT BENDING TEST USING SPLIT HOPKINSON BAR METHOD FOR CFRP ±45° ANGLE-PLY LAMINATES A.EJIRI , H.Yamada , N.Ogasawara , T.Uno , H.Yoshikawa , W.Yoneyama |
Ref:19 SURFACE CHARACTERIZATION OF PLASMA-TREATED 316L PRODUCED BY L-PBF E.Bolli , S.Kaciulis , A.Lanzutti , A.Mezzi , R.Montanari , A.Palombi , N.Picco , F.Sordetti , E.Vaglio , A.Varone , C.Verona |
||||||||||||
| Ref:218 OPTICAL COHERENCE ELASTOGRAPHY FOR STRAIN MEASUREMENT OF INTACT BLOOD VESSELS C.Sun , G.Du , H.Wang , J.Chen |
Ref:112 CHARACTERISATION OF A DISPLACEMENT-AMPLIFIED PIEZOELECTRIC ACTUATOR FOR HIGH-FREQUENCY FORCING IN BEARING TEST STAND G.Barnaby , R.Wragge-Morley , P.Mellor |
Ref:260 CORRELATION BETWEEN CHEMICAL COMPOSITION AND MECHANICAL SURFACE RESPONSE OF BIOMEDICAL PATCHES A.De Nigris , D.Gentile , L.Ambrosone |
|||||||||||||
| 16:00-16:30 | COFFEE BREAK | Congress cloister | |||||||||||||
| 16:30-18:30 | EURASEM GENERAL ASSEMBLY | Bolognini Library | |||||||||||||
| WEDNESDAY, 9th JULY 2025 | |||||||||||||||
| 8:00-9:00 | REGISTRATION | Congress Hall | |||||||||||||
| 9:15-10:00 | KEYNOTE LECTURE 3 | Aula Magna | |||||||||||||
| DR. ENG. LEONARDO BAGNOLI | |||||||||||||||
| Ducati Motor Holding S.p.A., Bologna, Italy | |||||||||||||||
| New developments in the structural design of high-performance motorbikes | |||||||||||||||
| 9:45-10:30 | COFFEE BREAK | Congress cloister | |||||||||||||
| 10:30-12:30 | PAPER SESSIONS 5 | All Rooms | |||||||||||||
| Bolognini Library | Room 7 | Room 6 | Room 5 | ||||||||||||
| X-ray & Neutron Tomography and Applications #1 | Optical Technics in Experimental Mechanics #1 | Thermoelastic Stress Analysis #1 | Experimental Techniques for Materials Characterization with special focus on Instrumented Indentation Test: to microstructure, degradation and residual stresses #3 | ||||||||||||
| Chair: Shengchuan Wu | Chair: Joaquim Silva Gomez | Chair: Giuseppe Pitarresi | Chair: Roberto Montanari | ||||||||||||
| Ref:259 IN SITU X-RAY TOMOGRAPHY OF FAILURE CRITICALITY IN Μ-LPBF FABRICATED CELLULAR LATTICE Y.Liu , S.Wu , X.Song |
Ref:41 MODAL CHARACTERISTIC IDENTIFICATION OF STRUCTURE USING HIGH-SPEED DIGITAL IMAGE CORRELATION METHOD X.CHE , R.XIN , N.GOO |
Ref:66 OPERATIONAL MODAL SHAPES OF PLATES USING DIGITAL IMAGE CORRELATION AND TSA Á.Molina-Viedma , L.Felipe-Sesé , E.López-Alba , F.Díaz-Garrido |
Ref:65 ASSESSMENT OF THE INTER-CRITICAL COARSE-GRAIN HEAT AFFECTED ZONE IN WELDED JOINTS OF VANADIUM MICROALLOYED HSLA STEEL A.Di Schino , B.Rodriguez.Vargas , R.Schmidt , G.Stornelli , A.Tselikova |
||||||||||||
| Ref:167 TIME RESOLVED FAILURE PHYSICS TOMOGRAPHY (5D CT) ON THE DAMAGE BEHAVIORS BY MULTI-MODAL METHODS S.Wu |
Ref:42 ETCHING SELECTION FOR PHASE ANALYSIS IN SUPER DUPLEX STAINLESS STEEL SAF2507 F.Sordetti , A.Palombi , N.Picco , M.Magnan , C.Maranzana , A.Varone , A.Lanzutti |
Ref:95 ASSESSMENT OF FATIGUE CRACK CLOSURE VIA WAVELET TRANSFORM OF INFRARED THERMOGRAPHY DATA L.Bercelli , B.Levieil , C.Doudard , S.Calloch |
Ref:249 STUDY OF CRACK-SUSCEPTIBILITY IN LASER WELDED NICKEL-BASED SUPERALLOY SHEETS BY 3D LASER WELDING MODEL G.MAIZZA , P.CHENG , A.VARONE , R.MONTANARI |
||||||||||||
| Ref:206 EXPERIMENTAL AND COMPUTATIONAL ANALYSES OF HYDROGEN EMBRITTLEMENT BEHAVIOUR IN ALUMINIUM ALLOYS USING SYNCHROTRON-BASED MULTIMODAL MEASUREMENTS H.Toda , Z.Wu , Y.Wang , H.Fujihara , M.Yamaguchi , T.Tsuru , K.Shimizu , K.Hirayama |
Ref:70 POLYMER CHARACTERIZATION USING LASER DOPPLER VIBROMETRY AND ULTRASONIC EXCITATION N.Hasheminejad , N.Ghaderi , A.Golmohammadi |
Ref:146 OPTIMISED SAMPLING STRATEGIES FOR SELF-REFERENCED THERMOELASTIC STRESS ANALYSIS G.Pitarresi , M.Tornabene , R.Cappello |
Ref:257 DEVELOPMENT AND OPTIMIZATION OF THE COMBUSTION UNIT OF A HYDROGEN-FUELED GAS TURBINE FOR ENERGY GENERATION U.Gottipati , A.Minotti , A.Giorgetti , G.Arcidiacono , V.La Battaglia |
||||||||||||
| Ref:208 ADVANCEMENTS IN LONG-TERM RELIABILITY OF HIGH-ZINC AL-ZN-MG-CU ALLOYS AGAINST STRESS CORROSION CRACKING Z.Wu , H.Fujihara , Y.Wang , H.Toda |
Ref:81 STUDY OF TRIANGULAR UNDEREXPANDED SONIC JETS S.Kato , T.Miyaguni , S.Nakao , Y.Miyazato |
Ref:156 APPLICATION OF THERMOELASTIC STRESS ANALYSIS ON TITANIUM IN THE PRESENCE OF BIAXIAL STRESSES D.Palumbo , R.De Finis |
Ref:153 INFLUENCE OF HYGROSCOPIC ABSORPTION ON THE RESILIENCE OF EPOXY MATRIX COMPOSITE REINFORCED WITH CERAMIC PARTICLES B.Mohamed |
||||||||||||
| Ref:243 4D MICROSTRUCTURAL CHARACTERIZATION OF CORROSION FATIGUE CRACK INITIATION IN HIGH-STRENGTH ALUMINUM ALLY N.Ao , S.Tang , S.Wu |
Ref:82 STUDY OF DIAMOND UNDEREXPANDED SONIC JETS K.Tanaka , T.Miyaguni , S.Nakao , Y.Miyazato |
Ref:166 STRAIN EXPERIMENTAL MODAL ANALYSIS VIA A HIGH-SPEED THERMOELASTICITY-BASED APPROACH L.Capponi , K.Zaletelj , G.Rossi , J.Slavič |
Ref:189 MECHANISM OF LOOSENING WITHOUT ROTATION FOR THIN PLATE BOLTED JOINT SUBJECTED TO OFFSET LOAD S.Hashimura , N.Yamamoto , S.Osaaka |
||||||||||||
| Ref:93 SHOCK STRUCTURES IN NINJA-STAR UNDEREXPANDED SONIC JETS R.Uchida , T.Miyaguni , S.Nakao , Y.Miyazato |
Ref:236 ALIASING INTERFERENCE AND SIGNAL UNDERSAMPLING IN THERMOELASTIC STRESS ANALYSIS R.Cappello , G.Pitarresi |
Ref:145 DELAMINATION AND FRACTURE OF PLY-ANGLE LAYERED COMPOSITES J.BOTSIS , G.Pappas |
|||||||||||||
| 12:30-14:00 | LUNCH | Congress cloister | |||||||||||||
| 14:00-16:00 | PAPER SESSIONS 6 | All Rooms | |||||||||||||
| Bolognini Library | Room 7 | Room 6 | Room 5 | ||||||||||||
| X-ray & Neutron Tomography and Applications #2 | Experimental Big Data Analysis and Artificial Intelligence #1 | Novel Applications of Experimental Mechanics #3 | Thermal based techniques for materials and components analysis: applications and perspectives #1 | ||||||||||||
| Chair: Yuhua Su | Chair: Mattia Mele | Chair: Alessandra Varone | Chair: Francesca Curà | ||||||||||||
| Ref:209 CHARACTERIZATION OF INTERNAL DEFORMATION AND DAMAGE EVOLUTION IN MATERIALS UNDER EXTREME ENVIRONMENT BY USING X-RAY CT L.Wang , C.Hou , R.Xing , J.Song , W.Liu , Y.Zhang , Q.Liu , F.Ren , S.Wu |
Ref:195 INTELLIGENT LOCALIZATION METHOD OF FATIGUE CRACK TIPS IN NUMEROUS HIGH-TEMPERATURE DIC IMAGES l.huang , x.sun , w.he , h.xie |
Ref:109 EXPERIMENTAL APROACH FOR THE ANALYSIS OF INTERNAL STRAIN MAPS ON A BOLTED CONNECTIONS USING DIGITAL IMAGE CORRELATION A.Conde-Calabrús , L.Felipe-Sesé , Á.Molina-Viedma , J.Almazán-Lázaro , E.López-Alba , F.Díaz |
Ref:30 ACTIVE AND PASSIVE THERMOGRAPHY FOR A NON-DESTRUCTIVE SURFACE TREATMENT CHARACTERIZATION IN SPUR GEARS L.Corsaro , F.Curà , R.Sesana |
||||||||||||
| Ref:219 CARBON STEEL S38C AXLE RESIDUAL STRESS NEUTRON TESTING AND LIFE PREDICTION T.Qin , F.Hu , S.Wu |
Ref:222 AI-BASED ANALYSIS OF GEARBOX VIBRATION-BEARING STRAIN CORRELATION X.Zhao , Y.Hou , X.Wang |
Ref:287 FATIGUE AND TENSIONAL FORCE DETERMINATION ON THIN FILMS USED IN SEMICONDUCTOR MANUFACTURING Y.Lee , Y.Chen |
Ref:92 INVESTIGATION OF MECHANICALLY INDUCED CRYSTALLIZATION IN NATURAL RUBBER FROM TEMPERATURE MEASUREMENTS UNDER CYCLIC LOADING A.LE BIHAN , V.LE SAUX , Y.MARCO , C.CHAMPY , P.CHARRIER |
||||||||||||
| Ref:220 THE DIFFRACTION ELASTIC CONSTANTS OF RAILWAY WHEEL STEEL OF HIGH-SPEED TRAIN X.Zhang |
Ref:99 A MACHINE LEARNING METHOD INTEGRATING MECHANICAL KNOWLEDGE AND ITS APPLICATION IN LAOD MODELING OF TUNNELING EQUIPMENT Q.Zhang , S.Liu , M.Ma , Y.Kang |
Ref:72 DESIGN AND PROTOTYPING OF A HIGH FORCE DENSITY, LOW-COST LINEAR ELECTRIC MOTOR H.OULD HAMRANE , K.TOUIMI , Y.ACHOUR , A.ZAOUI |
Ref:94 THERMOGRAPHIC ESTIMATION OF THE FATIGUE LIMIT OF A TITANIUM ALLOY C.Colombo , A.Salerno , A.Teyssiéras , J.Fiocchi , C.Biffi |
||||||||||||
| Ref:223 CHARACTERIZATION OF RESIDUAL STRESS FIELDS IN METALLIC MATERIALS: A COMBINED NEUTRON BRAGG EDGE IMAGING AND DIFFRACTION ANALYSIS Y.Su , T.Shinohara , J.Parker , K.Oikawa , T.Kai , W.Gong , S.Harjo , K.Aizawa , Y.Kiyanagi |
Ref:258 ALEATORY UNCERTAINTY QUANTIFICATION IN HETEROGENEOUS MATERIALS VIA BAYESIAN INFERENCE WITH PYMC: APPLICATION TO SINGLE LAP JOINTS F.Jan , M.Kujawa , Ł.Smakosz |
Ref:104 LOW TEMPERATURE AND PRECISION BONDING TECHNOLOGY USING SPREAD LASER BEAM FOR THIN LENS PACKAGE E.LEE , J.Na , M.Kim , B.Ju , T.Lee |
Ref:110 A MODEL FOR ASSESSING THE EFFECT OF THICKNESS ON APPARENT THERMAL DIFFUSIVITY IN LOCK-IN THERMOGRAPHY MEASUREMENTS L.Tromba , L.Santoro , R.Sesana |
||||||||||||
| Ref:333 MOVE CONTRAST X-RAY IMAGING FOR IN-SITU/IN-OPERANDO MECHANICAL TESTING WITH HIGH SENSITIVITY T.Xiao |
Ref:151 UNSUPERVISED DEEP LEARNING BASED DIGITAL IMAGE CORRELATION Q.MA , X.CHENG , B.LI , B.BAI , S.MA |
Ref:313 STUDY OF THE CORROSION-INDUCED DEGRADATION OF AERONAUTICAL ALUMINUM ALLOYS 2024 AND 2198 RIVETED SHEETS N.Alexopoulos |
Ref:157 NOVEL THERMOGRAPHIC NDE APPROACH FOR TESTING THE DISPERSION OF NANOPARTICLES IN A NANOCOMPOSITE N.Montinaro , G.Marchesa , D.Cerniglia , A.Pantano |
||||||||||||
| Ref:140 ADVANCING AUTOMATED MACHINING THROUGH ENHANCED SURFACE ROUGHNESS PREDICTION IN HIGH ENTROPY ALLOY COATING PROCESSES BY EXPLORING A NOVEL PARAMETER ACQUISITION USING ARTIFICIAL NEURAL NETWORK M.Dehghanpour Abyaneh , R.Sesana , M.Javadi , N.Sheibanian , S.Ozbilen , R.Lupoi |
Ref:63 TRIBOLOGICAL AND MICROSTRUCTURAL CHARATERIZATION OF COATINGS USED ON C75 TOOL STEEL N.Picco , M.Magnan , F.Sordetti , M.Tolazzi , M.Virgolin , A.Lanzutti |
Ref:179 STRESSES AND DEFORMATIONS INDUCED BY CURING IN EPOXY MATRIX CFRPS COMPOSITE LAMINATES A.Mengozzi |
|||||||||||||
| 16:00-16:30 | COFFEE BREAK | Congress cloister | |||||||||||||
| 16:30-18:30 | POSTER SESSION | Congress cloister | |||||||||||||
| Ref:9 EFFECT OF THE GLASS AND PVB THICKNESS ON THE HEAD INJURY CRITERION J.Kim , S.Ahn , J.Hwang , H.Jung |
Ref:18 AI CLASSIFICATION OF FRACTURE MODES IN METALLIC COMPONENTS M.Sileo , R.Montanari |
Ref:87 DEVELOPMENT OF AN IN-VITRO MODEL TO STUDY THE CERVICAL SPINE LOAD TRANSFER USING MOBI-C PROSTHESIS A.Ramos , G.Costa , J.Ferreira , Y.Ledoux , M.Mesnard |
Ref:101 EFFECT OF STRAIN RATE ON COMPRESSIVE PROPERTIES OF HIGH CARBON CHROMIUM BEARING STEEL AND CHROMIUM MOLYBDENUM STEEL K.Tateyama , H.Yamada , H.Fujiki |
||||||||||||
| Ref:106 EVALUATION OF THE RELATIONSHIP BETWEEN FATIGUE FRACTURE SURFACES IN ROTATING SHAFTS AND ACOUSTIC EMISSION GENERATION BEHAVIOR USING A NON-CONTACT AE MEASUREMENT SYSTEM T.Matsuo , Y.Abe |
Ref:108 EXPERIMENTAL VERIFICATION OF THE FATIGUE STRENGTH OF A LOCOMOTIVE COMPOSITE DRIVE SHAFT J.Chvojan , J.Vaclavik |
Ref:125 EFFECT OF STRAIN RATE ON THE PULLOUT RESISTANCE OF GEOGRIDS H.Verma , B.Manna , P.Mishra , D.Williams |
Ref:152 EFFECT OF CNF STRING ON TENSILE STRENGTH OF BIO-DEGRADABLE PARTS FABRICATED IN FUSED FILAMENT FABRICATION T.Tateno , A.Nishida , Y.Kiminami |
||||||||||||
| Ref:281 SYNTHETIC APERTURE X-RAY GHOST IMAGING: ENABLING SUB-MICRON PIXEL RESOLUTION N.Zhao , J.Tang , C.Zhao , J.Wu , H.Zhang , H.Guo , T.Xiao |
Ref:284 EXPERIMENTAL METHODOLOGY OF FAST X-RAY IMAGING BEAMLINE AT SSRF K.Li , F.Wang , J.Ji , Y.Fu , G.Du , B.Deng , T.Xiao , H.Xie |
Ref:297 NUMERICALLY STUDY FOR ASSESSEMENT OF BALLISTIC EFFICIENCY OF HIGH HARDNES PERFORATED PLATES WITH UNCONVENTIONAL HOLES A.Spoiala , A.Rotariu , L.Matache , E.Trana , F.Bucur |
Ref:299 NUMERICAL SIMULATION-BASED DETERMINATION OF THE VISCOSITY INFLUENCE OF MATERIALS SUBJECTED TO DYNAMIC LOADS AT HIGH STRAIN RATES L.Matache , A.Rotariu , I.Pacurar , R.Mircioaga , C.Puica , M.Marmureanu , P.Somoiag |
||||||||||||
| Ref:329 INVESTIGATION OF 316L PRODUCED BY ADDITIVE MANUFACTURING FOR NUCLEAR APPLICATIONS R.Montanari , A.Palombi , M.Richetta , A.Varone , A.ZAHID |
Ref:332 CHARACTERISTICS OF LDHS GROWN ON ECAP PROCESSED AZ31 ALLOY F.Berto , F.Bonollo , A.Fabrizi , A.Fava , P.Ferro , R.Montanari , R.Narducci , E.Pakhomova , A.Palombi , S.Rasulzade , M.Richetta , A.Varone |
||||||||||||||
| 16:30-18:00 | EURASEM COUNCIL MEETING | ||||||||||||||
| (EURASEM Council Members ONLY) | |||||||||||||||
| 20:30-23:30 | CONFERENCE BANQUET | Re Enzo Palace | |||||||||||||
| THURSDAY, 10th JULY 2025 | |||||||||||||||
| 9:00-9:45 | KEYNOTE LECTURE 4 | Bolognini Library | |||||||||||||
| DR. ENG. FRANCESCO PULVIRENTI | |||||||||||||||
| Ferrari S.p.A., Maranello, Italy | |||||||||||||||
| A failure mode-based approach to optimize powertrain mechanical validation | |||||||||||||||
| 9:45-10:30 | COFFEE BREAK | Congress cloister | |||||||||||||
| 10:30-12:30 | PAPER SESSIONS 7 | All Rooms | |||||||||||||
| Bolognini Library | Room 7 | Room 6 | Room 5 | ||||||||||||
| Non-Destructive Monitoring of Structural Integrity #1 | Fatigue and fracture #1 | 
|
Thermal based techniques for materials and components analysis: applications and perspectives #2 | ||||||||||||
| Chair: Dimitrios G. Aggelis | Chair: Zbigniew Kowalewski | Chair: Takeshi Iwamoto | Chair: Raffaella Sesana | ||||||||||||
| Ref:106 EVALUATION OF THE RELATIONSHIP BETWEEN FATIGUE FRACTURE SURFACES IN ROTATING SHAFTS AND ACOUSTIC EMISSION GENERATION BEHAVIOR USING A NON-CONTACT AE MEASUREMENT SYSTEM T.Matsuo , Y.Abe |
Ref:47 INVESTIGATION OF MIXED-MODE TEST ON DYNAMIC FRACTURE TOUGHNESS OF DISSIMILAR MATERIALS INTERFACE Y.Naito , Y.Tanaka , S.Arikawa |
Ref:283 A MEASUREMENT OF THE MECHANICAL PROPERTIES OF PURE ALUMINUM BY INSTRUMENTED TAYLOR IMPACT TEST AT ULTRA-HIGH VELOCITY USING A SINGLE-STAGE GAS GUN M.Matsumoto , C.Gao , T.Iwamoto , Y.Tanaka |
Ref:254 INCREASING DAMAGE ASSESSMENT IN HYBRID WOVEN COMPOSITES USING A NOVEL THERMOGRAPHIC PROCEDURE T.Matarrese , C.Sergi , D.Palumbo , F.Sarasini , U.Galietti |
||||||||||||
| Ref:154 RE-USE OF COMPOSITES WASTE IN THE PRODUCTION OF MEDICAL DEVICES: MECHANICAL ANALYSIS USING ACOUSTIC EMISSION E.Declercq , K.Giannadakis , D.Aggelis , D.Van Hemelrijck , K.Kalteremidou |
Ref:163 EFFECT OF MICROSTRUCTURE ON THERMAL CYCLE DAMAGE BEHAVIOR A YBTA3O9/YSZ DUAL TBC WITH COLUMNAR STRUCTURE Y.Yamazaki , T.Takizawa |
Ref:279 KEY TECHNOLOGIES FOR COAXIAL ULTRASONIC DEFECT DETECTION BASED ON FREQUENCY-TUNABLE LASER TRANSIENT GRATINGS Y.Song , M.Yue , R.Liu , Q.Li |
Ref:296 TEMPERATURE HARMONIC ANALYSIS TO INVESTIGATE INTRINSIC DISSIPATION OF FATIGUE LOADED TI6AL4V PRODUCED BY LASER POWDER BED FUSION F.Panella , G.Pitarresi , D.Crisafulli , R.Penna , P.Leo , G.Pollara , G.Risitano , M.Tornabene |
||||||||||||
| Ref:165 FRACTAL PATTERNS FOR FAILURE MODES OF ULTRA-HIGH PERFORMANCE CONCRETE Z.Jiang , F.Accornero , Z.Zhu |
Ref:178 SEARCHING FOR THE FIRST SIGN - CRACK INITIATION UNDER FATIGUE LOADING IN SEAWATER-CORRODED STRUCTURAL S355 STEEL S.Elahi , R.Krankenhagen , S.Chaudhuri , W.De Waele |
Ref:43 TEST BENCH FOR THE MULTIDIMSENSIONAL EXCITATION OF DISC SHAPED DRIVETRAIN COMPONENTS P.Altoé , K.Wolter , S.Ott , A.Fidlin |
Ref:161 ENERGY-BASED APPROACHES FOR A RAPID FATIGUE CHARACTERISATION OF ALSI10MG-AM R.De Finis , D.Palumbo , U.Galietti |
||||||||||||
| Ref:188 CFRP SELF-SENSING COMPOSITE LAMINATE INTERLEAVED WITH PIEZOELECTRIC NANOFIBERS T.Brugo , F.Mongioì , G.Selleri , E.Maccaferri , R.Palazzetti , P.Bettini , A.Zucchelli , D.Fabiani , L.Mazzocchetti |
Ref:239 A FINITE ELEMENT METHODOLOGY FOR THE STRUCTURAL ASSESSMENT OF HIGH PERFORMANCE ELECTRIC MOTOR GEARS S.Messina |
Ref:121 EFFECT OF THE HIGHLY ACCELERATED STRESS TEST ON THE INTERFACIAL ADHESION OF DIE ATTACH FILM IN PACKAGE STRUCTURE S.Oh , H.Jeong , J.Lee , S.Kim , S.Han , H.Moon , J.Song |
Ref:231 INVESTIGATING THE POSSIBILITY TO DETECT AND CHARACTERIZE RAIL CRACKS AT HIGH SPEEDS WITH INDUCTION THERMOGRAPHY E.D'ACCARDI , G.DELL'AVVOCATO , G.MARINELLI , G.FUMAROLA , D.PALUMBO , U.GALIETTI |
||||||||||||
| Ref:264 THE GARISENDA TOWER IN BOLOGNA: DAMAGE ASSESSMENT RESULTS FROM PRINCIPAL COMPONENT ANALYSIS, ACOUSTIC EMISSION, AND NONLINEAR FINITE ELEMENT INVOLVING CREEP AND SMEARED CRACKING G.Lacidogna , P.Marin Montanari , S.Invernizzi , A.Di Tommaso |
Ref:240 A FINITE ELEMENT METHODOLOGY FOR STRUCTURAL ASSESSMENT OF A GEAR WITH NITRIDING TREATMENT F.Manni |
Ref:275 SIMULATING AXIAL BEARING LOADING FROM AN E-VTOL MULTICOPTER ON A LABORATORY RIG R.Wragge-Morley , G.Barnaby , J.Yon , P.Mellor |
Ref:27 RANDOM FATIGUE LIFE ASSESSMENT NUMERICAL AND EXPIRIMENTAL STUDY R.Lamine , B.Ahmed |
||||||||||||
| Ref:308 CHARACTERIZATION OF CONCRETE DAMAGE THROUGH ULTRASONIC DISPERSION G.Lefever , N.Ospitia , N.De Belie , D.Angelis |
Ref:242 CYCLIC STRAIN RESPONSES AND CRACK GROWTH IN FE-MN-C TWIP STEEL UNDER STRESS-AMPLITUDE CONTROLLED FATIGUE LOADING L.Qian |
Ref:274 ELECTROMAGNETIC HOPKINSON BAR: BASIC PRINCIPLES AND APPLICATION Y.Guo |
Ref:262 HMX BASED ENERGETIC MATERIAL COMBUSTION IN A SPHERICAL CONTAINER AND ITS QUANTITATIVE MODEL OF REACTION PRESSURE C.Pan |
||||||||||||
| 12:30-14:00 | LUNCH | Congress cloister | |||||||||||||
| 14:00-16:00 | PAPER SESSIONS 8 | All Rooms | |||||||||||||
| Bolognini Library | Room 7 | Room 6 | Room 5 | ||||||||||||
| Optical Technics in Experimental Mechanics #2 | Fatigue and fracture #2 | Experimental testing of lightweight materials, structures and components #3 | Experimental techniques and monitoring systems for major structures #1 | ||||||||||||
| Chair: Shinichiro Nakao | Chair: Danny Van Hemelrijck | Chair: Jian Xiong | Chair: Sayed A. Nassar | ||||||||||||
| Ref:144 INHOMOGENEOUS TENSILE DEFORMATION OF NITROGEN-ADDED TI-NB BASED SHAPE MEMORY ALLOYS K.Golasinski , M.Maj , S.Musial , W.Tasaki , E.Pieczyska , H.Kim |
Ref:277 EVALUATION OF FATIGUE DAMAGE DEVELOPMENT IN POWER ENGINEERING STEEL AFTER LONG TIME EXPLOITATION SUPPORTED BY DIC TECHNIQUE Z.Kowalewski , M.Kopec , A.Brodecki |
Ref:315 DESIGN AND MECHANICAL BEHAVIORS OF CURVED-WALL CARBON FIBER COMPOSITE HONEYCOMB SANDWICH STRUCTURE WITH HIGHER BUCKLING RESISTANCE J.Xiong |
Ref:31 A NOVEL STRUCTURE HEALTH MONITORING METHOD FOR MESH REFLECTORS BASED ON THE RESNET NETWORK S.Liu , G.Luo , S.XIE |
||||||||||||
| Ref:97 A CALIBRATION METHOD OF FRINGE PROJECTION PROFILEMETRY BASED ON OPTICAL RAY MODEL CORRECTION W.HU , C.XIONG , Y.LIU |
Ref:261 INCREASING THE LOAD CAPACITY AND EXTENDING THE FATIGUE LIFE OF HOLLOW ROTATING DISKS BY APPLYING ROTATIONAL AUTOFRETTAGE M.Perl , S.Kamal |
Ref:334 INFLUENCE OF THE RELATIVE ANGLE OF ROTATION BETWEEN LAYERS ON THE NATURAL FREQUENCY OF MULTILAYER SANDWICH PLATES Y.Wang , z.Wang , J.Pan |
Ref:224 FAILURE ANALYSIS OF COMPOSITE WIND TURBINE BLADE JOINT: CASE STUDY S.Nassar |
||||||||||||
| Ref:192 SMART DIC: USER-INDEPENDENT, ACCURATE AND PRECISE SHAPE AND DEFORMATION MEASUREMENT WITH SELF-ADAPTIVELY SELECTING CALCULATION PARAMETERS J.Zhao , B.Pan |
Ref:46 EFFECT OF POST TREATMENT ON MECHANICAL PROPERTIES OF CELLULOSE NANOFIBER SHEET M.Asami , A.Miyawaki , S.Arikawa |
Ref:336 IN-PLANE COMPRESSIVE MECHANICAL PROPERTIES OF A NOVEL SUTURE-INSPIRED DISCRETE SELF-LOCKING STRUCTURE S.Wang , Y.Tang , Y.Liu |
Ref:227 SEQUENTIAL FREE-OSCILLATION TEST METHOD FOR ROCKING STRUCTURAL SYSTEMS A.Schultz , D.Kalliontzis , S.Sritharan |
||||||||||||
| Ref:226 ELECTROWETTING-ACTUATED LIQUID IRIS FOR SWITCHABLE APERTURE C.Lee , S.Park , S.Chung , J.Lee |
Ref:147 EFFECT OF UNIT CELL CONFIGURATION ON BENDING BEHAVIOR OF SPREAD-TOW WOVEN FLAX/PP COMPOSITES IN THE MOLTEN STATE R.Hossein Abadi , U.Sachs , D.Van Hemelrijck , K.Kalteremidou |
Ref:337 A COUPLED DESIGN APPROACH FOR KIRIGAMI-INSPIRED AUXETIC WITH TUBE TUNABLE ENERGY ABSORPTION I.Cai , Y.Yu , X.Li |
Ref:48 IMPROVING THE PERFORMANCE OF THE STRUCTURE CONTRACTING BY SOUND WAVES Y.Tsuchida , Y.Tsuciyama , s.Arikawa |
||||||||||||
| Ref:291 DETERMINING THE HEART PERFORMANCE OF EXPERIMENTAL AN ANIMAL BASED ON THE AVERAGED SPEED USING DIGITAL IMAGE CORRELATION METHOD C.Hwang , C.Lai , R.Qiu , W.Wang , Y.Lu , R.Weng |
Ref:212 DELAMINATION AND DRYING STRATEGIES FOR ACHIEVING FULLY FREESTANDING IONOMER-BOUND CARBON FILMS WITH ENHANCED MECHANICAL RELIABILITY Y.Kim , T.Kim |
Ref:338 HEXAGONAL CHIRAL BISTABLE AUXETIC METAMATERIALS: GEOMETRICAL AND MECHANICAL ANALYSIS X.Li , B.Ma , X.Chen |
Ref:229 MAGNETICALLY MANEUVERABLE MICROCARRIER USING ACOUSTIC BUBBLES J.Park , Y.Kim , D.Kim , S.Chung , K.Lee |
||||||||||||
| Ref:304 SNAPSHOT FULL STOKES CAMERA BY RGB POLARIZATION CAMERA FOR STRESS VISUALIZATION Y.Otani , J.Onaka , N.Hagen |
Ref:316 RATE-DEPENDENT FAILURE OF TRANSVERSELY-ISOTROPIC ROCK THAT EXHIBITS A BI-MODULUS CONSTITUTIVE RESPONSE A.Guthai , R.Singh , A.Fahem |
Ref:68 INFLUENCE OF HYGROSCOPIC ABSORPTION ON THE RESILIENCE OF EPOXY MATRIX COMPOSITE REINFORCED WITH CERAMIC PARTICLES B.Mohamed |
Ref:120 CAPILLARY DRIVEN SOLDER CLIMBING DUE TO HAIRLINE SURFACE TEXTURE FOR ADVANCED PACKAGE ASSEMBLY J.Na , E.Lee , Y.Kim , E.Jo , D.Kim , D.Lee , T.Lee |
||||||||||||
| 16:00-16:30 | COFFEE BREAK | Congress cloister | |||||||||||||
| 16:30-18:30 | PAPER SESSIONS 9 | All Rooms | |||||||||||||
| Bolognini Library | Room 7 | Room 6 | Room 5 | ||||||||||||
| Wood Mechanics and Timber Engineering #3 | Additive Manufactured Materials: Production, Experiments and Applications #5 | Thermoelastic Stress Analysis #2 | 
|
||||||||||||
| Chair: Michael Schweigler | Chair: Paul Wood | Chair: Umberto Galietti | Chair: Fei Su | ||||||||||||
| Ref:139 INFLUENCE OF MOISTURE ON BEECH AND BIRCH: COMPRESSION PERPENDICULAR TO GRAIN AND ROLLING SHEAR PROPERTIES E.Binder , E.Kuck , C.Bertram , Z.Shehadeh , M.Scweigle , C.Sadhaas , T.Bader |
Ref:324 ROCKWELL AND SCRATCH ADHESION TESTS FOR HARD COATINGS DEPOSITED ON LIGHT ALLOYS FABRICATED BY SLM E.Cerri , E.Ghio , M.Bonilauri , G.Bolelli , A.Bertè , P.Colombi |
Ref:89 THERMOELASTIC STRESS ANALYSIS SET UP OPTIMIZATION VIA ROBUST DESIGN F.Di Carolo , U.Galietti |
Ref:122 TIME-GATED ACTIVE-IMAGING DIGITAL IMAGE CORRELATION: A NOVEL SOLUTION FOR ULTRA-HIGH TEMPERATURE DEFORMATION MEASUREMENT L.Yu |
||||||||||||
| Ref:98 SUITABILITY OF POPLAR ROTARY CUT VENEERS AS ACTIVE LAYERS IN SHAPE CHANGING WOOD BILAYERS S.CALVANO , F.NEGRO , C.CREMONINI , R.ZANUTTINI |
Ref:21 LPBF GRADED LATTCE STRUCTURE: A MICRO-MECHANCAL PROPERTY STUDY M.Cabibbo , G.Grima , A.Santoni , M.Gatto , E.Santecchia , S.Spigarelli , K.Sleem |
Ref:177 DEVELOPMENT OF STEREO DIC MEASUREMENT ON THERMAL ENERGY STORAGE TANK: DETERMINATION OF MECHANICAL RESPONSE G.Alonso Aruffo , Y.Lalau , L.Penazzi , R.Bonnaire |
Ref:225 APPLIED STRESS MODULATION OF BRILLOUIN OSCILLATIONS AT THE FILM-SUBSTRATE INTERFACE BY PICOSECOND ULTRASONICS Y.Zeng , L.Li , S.Wang , Z.Wang , C.Li |
||||||||||||
| Ref:278 LONG-TERM ANALYSIS OF STEEL-TIMBER SHEAR CONNECTORS FOR COMPOSITE FLOORS M.Kamalinejad , C.Burigo , C.Loss , I.Giongo |
Ref:74 INFLUENCE OF 3D PRINTING PARAMETERS ON BASF ULTRAFUSE 316L STEEL MECHANICAL PROPERTIES N.Daniel , P.Płatek , K.Cieplak , M.Sarzyński |
Ref:61 NUMERICAL SIMULATION FOR THE THERMAL-MECHANICAL RESPONSE OF PBX-2 EXPLOSIVES AT DIFFERENT HEATING RATES X.ZHANG |
Ref:271 NEW PHOTOELASTIC TECHNOLOGY AND ITS APPLICATIONS BASED ON PIXELATED POLARIZATION CAMERA AND RGB METHOD F.SU , Q.Liu |
||||||||||||
| Ref:49 SHEAR CHARACTERIZATION IN SOFT POLYURETHANE FOAMS: A CRITICAL COMPARISON AMONG EXPERIMENTAL APPROACHES M.Patronelli , C.Caterina , V.Moramarco , G.Pappalettera , L.Del Core |
|||||||||||||||
| 18:45-19:00 | CLOSING CERIMONY | Bolognini Library | |||||||||||||